42bj-individual-comfort-modules

Nominal capacities in cooling from 0,5 to 6,0 kW and heating from 0,5 to 12,2 kW

Features

A compact air conditioning system, available in three sizes, designed to air condition individual rooms with an area of between 25 and 50 m2.
Incorporates a galvanised sheet steel casing with a lining of thermal and acoustic insulation (fire class M1).
It includes a centrifugal fan with a low-energy consumption (LEC) motor.
This direct-drive motor is electronically commutated (commonly referred to as EC motor).

It is piloted by a 0-10 V signal that permits operation with a wide range of rotational speeds, varying from the base setting and is precise, simple and quiet.
It also includes an air filter, a fresh air inlet with adjustable air quantity, a chilled-water cooling coil and a hot-water heating coil and/or an electric resistance heater.
Flexible, thermally and acoustically insulated ducts connect ICM units to one or more plenums in the ceiling void.
These feed unobtrusive linear ceiling diffusers (Carrier Moduboot 35BD/35SR units) supplying the individual rooms or zones.
These units can be installed above false ceilings or in floor voids but away from occupied zones, ideally in central areas where they are easily connected to hot-water and chilled-water circuits and the fresh air supply.
These circuits, normally installed in corridors and halls to facilitate maintenance, never pass through the conditioned spaces.
Only the passive elements of the system, the 35BD/35SR diffusers are within the space they serve.
This means that maintenance can be done away from the occupied areas and programming is possible while the building is occupied.
Low inherent noise was a key factor in the design of the ICM.
With their high available static pressure, the units can be installed well away from the conditioned space.

Download our Documents

A system with a flexible design to suit in a variety of applications

Nominal cooling capacity from 504 to 1138 kW

Nominal cooling capacity from 16 to 40 kW